Aggregator

Mississippi-based Boswell Media learned that good can spring from tragedy — even a tragedy that resulted in the downing of a 350-foot tower, the smashing of a studio roof and the loss of radio stations from the air.

After Hurricane Ida tore through Louisiana in early September, it turned toward Kosciusko, a city of nearly 7,500 in central Mississippi and the home of Boswell Media. Winds of 100 mph whipped through the area, deluging the city with hard rain and felling trees all across town.

[Read: Big Louisiana Radio Tower Comes Down in Ida]

“The ground had been so wet here after so much rain,” said Johnny Boswell, president of Boswell Media. At about 4:45 pm on Sept. 1, a staffer in the studio heard a thud as a tree from an adjacent property fell and landed on one of the tower’s guy wires. Even as the tree lay overturned on the guy wire, “the tower was doing its best to right itself,” Boswell said. But the combination of wet ground and fallen tree won the battle, bringing the tower down on the station roof.

The good news: the staffer inside the building was not injured even as the studio roof absorbed 100% of the tower weight. The bad news, however, was that the collapse cut off transmission of station WLIN(FM) and the network that feeds two other stations — WCKK(FM) and WKOZ(FM).

Over the next few weeks, the mangled tower was hauled away, a new concrete support structure was installed and dozens trees around the studio were removed. “We took the opportunity to eradicate around the perimeter over 50 trees close to the property line,” Boswell said. For a station that’s been in that same location since 1947, the lesson here is to watch out as nature grows and changes around towers and other buildings. “[Things like that] can creep up on you,” Boswell said.

The stations were brought back on air soon after the accident via a temporary antenna atop a power pole. “We had an STL and we were able to get to our other transmitting tower via our codecs,” Boswell said. “Everything is now up and running.”

After a new tower was located in Virginia, the station contracted with J Crow Tower in Philadelphia, Miss., to install a Rohn 65G, a 350-foot tower with a wind load of 90 to 110 mph. The station is also taking the opportunity to add a new temporary antenna to the tower. “Now we’ll have a good low-power option,” Boswell said.

By mid-October, the tower was in the midst of being painted and prepped for installation. And what’s more, the station found a way to turn tragedy into opportunity.

“There were so many trees that were cut and some logs that came out that were useable,” Boswell said. He coordinated with the team cutting the trees and together they decided to cut the logs to a useable length. The reclaimed wood has been donated to a saw mill rehabilitation program at a local correctional facility.

 

The post Tower Misfortune Turns into an Opportunity for Mississippi Radio Station appeared first on Radio World.

This article originally appeared on the Fluke website and is used with permission. The company has posted online courses and other resources at www.fluke.com/en-us/learn.

Anyone who makes their living by working with electricity quickly develops a healthy respect for anything with even a remote chance of being “live.” Yet the pressures of the getting a job done on time or getting a mission-critical piece of equipment back online can result in carelessness and uncharacteristic mistakes by even the most seasoned electrician.

This list was developed as a quick reminder of what not to do when taking electrical measurements. Paying attention to three specific categories when thinking about the most common mistakes made when making electrical measurements, personal protective equipment, tools, and culture of safety.

Personal Protective Equipment (PPE)

Having the right equipment to keep you save comes first.

1: Leave your safety glasses in your shirt pocket.

Take them out. Put them on. It’s important. The same goes for taking the time to put on insulated gloves and flame-resistant clothing. All of these steps fall under wearing proper PPE. Follow the table method to figure out what level of gear you need on, as detailed by NFPA 70E Standard for Electrical Safety in the Workplace.

2: Work on a live circuit.

De-energize the circuit whenever possible. If the situation requires you to work on a live circuit, use properly rated tools paired with the correct PPE for the environment. Make sure you wear safety glasses or a face shield and insulated gloves, remove watches or other jewelry, stand on an insulated mat and wear flame-resistant clothing, not regular work clothes. 

Tools

Once you’re geared up and you’re appropriately protected, it’s just as important to make sure the tool in your hand is the right one for this situation, and the test tool and its accessories are safe to use.

3: Replace the original fuse with a cheaper one.

If your digital multimeter meets today’s safety standards, that fuse is a special safety sand fuse designed to pop before an overload hits your hand. When you change your meter fuse, be sure to replace it with an authorized fuse.

4: Use the wrong test tool for the job.

It’s important to match your digital multimeter to the work ahead. Make sure your test tool holds the correct CAT rating for each job you do, even if it means switching DMMs throughout the day.

5: Grab the cheapest meter on the rack.

You can upgrade later, right? Maybe not, if you end up a victim of a safety accident because that cheap test tool didn’t actually contain the safety features it advertised. Look for independent laboratory testing marks on your test tools to ensure they have been proven to handle what they’re advertised at.

6: Neglect your leads.

Test leads are an important component of digital multimeter safety, they are an extension of your test tool. Make sure your leads match the CAT level of your job as well as the tool. Look for test leads with double insulation, shrouded input connectors, finger guards, and a non-slip surface.

7: Hang onto your old test tool forever.

Today’s test tools contain safety features that were unheard of, even a few years ago. Even if your old test tool is still working, many of the new features, both safety and test features, can be well worth the cost of an equipment upgrade.

Culture of Safety

How your company thinks about and learns about safety influences how individuals conduct their work, what the culture of safety around them looks like. Mistakes are made when you’re pushed to work too quickly or new employees aren’t properly trained.

8: Use a bit of wire or metal to get around the fuse all together.

That may seem like a quick fix if you’re caught without an extra fuse, but that fuse could be all that ends up between you and a spike headed your way.

9: Fail to use proper lockout/tagout procedures.

Remember to follow the correct steps to remove power from an electrical circuit or panel, and to lock out and tag the panel or circuit, so that no one can re-energize it while work is in progress. Lockout/tagout procedures are detailed as part of NFPA 70E. 

10: Keep both hands on the test.

Saved a big one for last on this list: Do not keep both hands on the test. When working with live circuits, remember the old electrician’s trick to keep one hand in your pocket. That lessens the chance of a closed circuit across your chest and through your heart. Hang or rest the meter if possible. Try to avoid holding it with your hands to minimize personal exposure to the effects of transients.

[Related: Read the ebook “Mission-Critical: Maintaining Your Transmitter Site”]

The post 10 Dumb Things Smart People Do When Testing Electricity appeared first on Radio World.

East Valley Institute of Technology student Annaliese Stickle sitting at the board; behind, left to right, student and Drury finalist Finn Taylor, senior Jonas Pearson, Pulse Operations Manager Brian Mobley, student and Drury finalist Amber Solomon, Faculty Advisor Dave Juday and student Moriah Paynes.

A high school radio station has been honored with four national awards — including Best High School Radio Station — for their efforts in news reporting, promotion and coverage of key social issues.

KPNG(FM) Pulse Radio is a 5,000-watt public radio station on FM 88.7 that showcases the talents of students enrolled at the East Valley Institute of Technology (EVIT), a career and college prep school in Mesa, Ariz. The awards are part of the annual John Drury High School Radio Awards — named after TV news anchor John Drury — to recognize excellence in high school radio broadcasting in 17 areas including categories like best newscast, best sports talk program and best website.

Pulse Sports crew at a high school game. Left to right – East Valley Institute of Technology alum Jimmy Watters, students Finn Taylor, Braden Lilly and Moriah Paynes, alum Derek Montgomery, student Parker Gurash and staff engineer Amanda Krainski.

As part of the 2020–21 awards, Pulse Radio students within the Radio/Audio Production program at EVIT were honored with Best High School Radio Station, Broadcaster of the Year, Best Public Affairs Program and Best Station Promo.

[Read: Drury Awards Celebrate High School Radio]

“Words can’t describe how proud I am of our EVIT Radio students,” said Dave Juday, a radio/audio production instructor at EVIT and faculty advisor at the station. “Regarding the last school year, I’ve said multiple times that not only did our students survive in-person learning during a pandemic, but they also found a way to thrive. These awards are a testament to our students’ hard work and the dedication they have to see our program and radio station succeed.”

One of the newest categories — Broadcaster of the Year — was given to recent graduate Donoven Ong, who was also named Student of the Year by the school’s Radio/Audio Production department. Ong is currently a freshman at Northern Arizona University, where he has already launched his college radio career at KJACK Radio.

Radio students Annaliese Stickle (left) and Finn Taylor in one of the production rooms.

Recent graduate Essie Bianco was honored for Best Public Affairs Program for her Public Pulse show about mental health. The program focused on mental health of students and staff as they dealt with off-campus virtual learning and a return to in-person instruction in the midst of the COVID-19 pandemic.

Best Station Promo was awarded to senior Justin Brooks for his Halloween promo production.

This is the third year that EVIT students have competed in the John Drury High School Radio Awards and overall received 21 nominations — the most of any high school — in 11 categories. The honors continue a streak for the station: In 2019–2020, EVIT students were recognized for Best Public Affairs Show, Best PSA and Best Radio Drama. The previous year, EVIT earned awards for Best Promo and Best Station Advisor.

 

The post Arizona High School Station Named Best in the Nation appeared first on Radio World.

San Francisco contract engineer Bill Ruck awards Frank Hertel a gold star for his unique approach to a noise-reducing mic project as we described in August and shown here. Bill noted that a similar system was part of the Grateful Dead’s “Wall of Sound.”

Bill adds that Frank connected his Pin 1 (ground) to the shell of the XLR connector, and says there are two camps in this regard. He has learned not to connect Pin 1 to the shell on his cables because it can induce all sorts of ground issues when interfacing to unfamiliar equipment. He says you never know what “The Other Guy” has done with his ground.

This is especially true with video. Remember that video is unbalanced and that the video folks tend to have a lot of crap on their ground systems. You could hear sync with analog NTSC; but today, SD just puts wideband noise everywhere.

Because of that potential for picking up noise, Bill made what Dan Healy, the Grateful Dead front-of-house mixer, called “the mother of all isolation boxes.”

It is a heavy steel box with four Western Electric 111C coils wired 1:1. The male and female connectors on the top were mounted in acrylic and therefore are insulated from each other.

Only Pins 2 and 3 are connected to the 111Cs. No matter how mangled the cables are, they can’t cause problems to the front-of-house or recording truck.

“Back in my broke misguided youth,” Bill continues, “I used to borrow mic cables for events. I learned the hard way to spend the night before the event testing and rebuilding them.” Nowadays Bill has several thousand feet of cables, all made properly, mostly with Canare L-4E6S.

Like most of us, Bill has seen Pins 2 and 3 reversed as well as the common error of reversing Pins 1 and 2. That can really cause havoc.

From all his cable experience, Bill has learned that even with Pin 1 floating, you can still have issues if the XLR shell is connected to Pin 1.

As a workaround, Bill constructed several 6-inch green cables that have Pin 1 floating at the female end and Pins 2 and 3 through. Pin 1 (the cable shield) is connected only at the male end. That way, no matter what Pin 1 and the shell are connected to, the ground is broken. This breaks up ground loops.

In Frank’s noise-cancelling mic application, tying Pin 1 to the shell shouldn’t make much of a difference, since microphones also tie Pin 1 to the mic body.

Splendid isolation

If you don’t have Western Electric transformers, you can pick up easy-to-wire isolation transformer boards from Newman-Kees RF Measurements & Engineering, as shown here

This Audio Hum and Lightning Isolator board from Newman-Kees uses high-quality transformers to isolate lines.

They provide lightning isolation to 1200 Volts and can be strapped for various applications as shown in the schematic. Features include 600 Ohms in and out, primary and secondary center taps, board traces for attenuators and 1/8-inch mounting holes. Cost: $35.50. Email newman-kees-hertel-rf-eng@twc.com.

 

Hard to use?

Another opinion came from Oliver Berliner of SounDesign Engineers.

“Call me a killjoy for fearing that Frank Hertel’s clever ‘Outtaphaser,’ detailed in the Aug. 18 Workbench, may be as tricky to operate effectively as it was to create,” Oliver writes.

“That’s because the output levels of the two crowd mics must match, leaving the level of the guest’s voice to be regulated intentionally and/or inadvertently by the mics’ moving toward or away.”

Oliver said a way to overcome this limitation while still reaping the advantages of stereo theory is to mount twin mics on a dual-mic stand and use them for the crowd noise throughout the game, giving a third mic to the interviewer.

Cancel that cancellation

I followed up with Frank about these comments.

First, in preparing the article, I should not have used the phrase “noise cancelling,” rather “noise reducing.” Frank’s out-of-phase mic scheme reduces the background crowd noise but doesn’t cancel it completely.

Although Mr. Berliner’s suggestion of using three mics certainly will work, it’s more appropriate for a fixed position mic. Frank’s system is best used for a roaming reporter, who is not stationary.

Frank also pointed out that this technique is based on “ideal theory.” If an identical sound, at an identical level, is intercepted by both microphones; and if those microphones have identical frequency response and equal sensitivity, the resultant audio output would theoretically be zero. But since we are living in a real world, with a lot of physical variations, the best that can be claimed is that a goodly amount of background noise will be greatly reduced.

Try it out and let Workbench readers know what you experienced. Email johnpbisset@gmail.com.

The post Workbench: Readers React to Frank Hertel’s “Outtaphaser” appeared first on Radio World.

The Bureau enters into a Consent Decree with Fort Berthold Communications Enterprises

Is a subscription to SiriusXM really worth the money, especially in a locale where HD Radio multicasts abound and Bluetooth connectivity puts audio from around the world through one’s car speakers in a matter of seconds? According to our Editor-in-Chief, the answer is an easy one: Yes. One day without SiriusXM wasn’t exactly a pleasant one, he writes in this RBR+TVBR OBSERVATION.

Please Login to view this premium content. (Not a member? Join Today!)

Across three continents, more than 75% of buyers surveyed agree that “TV” is now both linear and streaming platforms. Concurrently, more than 70% of respondents believe that all forms of TV should be sold on impressions.

That’s the key conclusion from a global analysis of “converged TV” from TVSquared, which combines insights from close to 1,000 buyers in the U.S. and in the U.K., Germany and Australia.

Analyzing billions of ad impressions across 20 converged TV campaigns active on TVSquared’s ADvantage platform, the report also uncovers insights on incremental reach and how to best approach converged TV strategies.

Please Login to view this premium content. (Not a member? Join Today!)

The individual who rose from an account executive to Local Sales Manager in December 2020 for iHeartMedia‘s Minneapolis-St. Paul radio stations has been promoted once again.

Meet the new VP of Sales for the company’s Twin Cities radio properties.

Please Login to view this premium content. (Not a member? Join Today!)

From 2006-2010, he served as the financial controller of CBS Boston, comprised of WBZ-4 and MyNetwork TV affiliate WSBK-38. 

Now, ViacomCBS has chosen this company executive to serve as the successor to Mark Lund by taking the President/GM post for the stations, and its CBSN Boston OTT-delivered all-news offering.

Please Login to view this premium content. (Not a member? Join Today!)

The NAB Broadcast Engineering & Information Technology Conference couldn’t meet in person this month, but its presentations and proceedings will be available online.

The National Association of Broadcasters said it will make the conference available as video on demand in November, via a purchase option on its NABAmplify.com site.

“Along with access to the majority of presentations originally planned for the 2021 NAB Show via VOD, viewers will receive access to the full set of papers compiled in the Proceedings of the 75th BEIT Conference,” it said.

[Read Radio World’s feature on the 75th anniversary of the BEITC.]

NAB said topics this year include all-digital radio, cloud technologies for broadcast, hybrid radio, mitigating facility risks (physical and cyber), Next Gen TV technologies, OTT TV technologies, radio broadcasting technologies, SMPTE ST 2110 / IP-based facilities, TV enhancements and using drones for broadcast engineering.

Related: “Drones Become Part of Radio’s Toolkit”

The conference program committee includes technologists from NAB member organizations and other experts, with representatives from the Society of Broadcast Engineers, the Broadcast Technology Society of the Institute of Electrical and Electronics Engineers (IEEE-BTS), the North American Broadcasters Association, and the Society of Cable Telecommunications Engineers.

The post BEIT Program to Be Available on Demand appeared first on Radio World.

The Board of Directors of Nielsen Holdings plc has declared a quarterly cash dividend.

The decision? To award a bonus payment of $0.06 per share of Nielsen’s common stock.

The dividend is payable on December 2, to shareholders of record at the close of business on November 18.

And, the dividend comes as Nielsen shares appear to have stopped a five-month dip in value. On May 17, a $28.10 finish was seen for NLSN, after starting the year just below $21. Since then, Nielsen shares have been on a steady downhill track, reaching $19.19 at the end of September for a year-to-date low.

As of 1:52pm Eastern on Friday (10/15), NLSN was trading at $19.83 — its lowest value since mid-December 2020.

Bonneville International Corp. has signed off on “modernizing and upgrading” its existing boosters for FM signals tied to three San Francisco radio stations.

In a filing made this week with the FCC, it became known that GeoBroadcast Solutions, the technology company behind Maxxcasting seeks Commission approval of the estimated March 2022 deployment of its FM Booster service at Adult Contemporary KOIT-FM 96.5, Top 40 KMVQ-FM “99.7 NOW,” and Adult R&B KBLX-FM 102.9.

A five-node single frequency network (SFN) with HD Radio operation, GBS seeks to improve each of the FM’s existing booster signals in a manner in which each station will share the antenna infrastructure through a multiplex system.

The improved signal in the terrain-challenged San Francisco Bay Area is designed to help the three stations’ detectability among holders of Nielsen Audio Portable People Meters (PPMs).

KOIT, KBLX and KMVQ were acquired in 2018 by Bonneville from Entercom, now Audacy.

“By implementing a MaxxCasting SFN system, the technology provides a solid, interference-free signal, sound, and HD Radio in the East Bay for all three Bonneville stations,” GBS explains.

Among the project partners is GatesAir, which manufactures the Flexiva transmitter.

KOIT presently uses a 3,300-watt booster in Martinez, benefiting listeners in San Ramon, Walnut Creek and Concord; KMVQ and KBLX each have a 185-watt booster in Walnut Creek.

Maxxcasting has been marketed by GeoBroadcast Solutions as a way for radio broadcast stations to fill-in signal holes in major metropolitan areas, greatly improving coverage. It has recently been put to work in Chicago, and for an Audacy Sports Talker in San Diego.

RBR+TVBR RELATED READ:

A Bustos Media FM Boosts With ‘MaxxCasting’ Plan RBR-TVBR There’s a Class C 64kw FM facility serving the Seattle-Tacoma region’s Hispanic audience by providing regional Mexican programming. It’s a big stick, hence its moniker: “La Gran D.” But, this station is licensed to Elma, Washington and uses a tower well to the southwest of downtown Seattle. The result: Signal holes in the metropolitan area. This issue has just been resolved in a big way, as the station is now the latest licensee of Maxxcasting technology.

For decades, Univision Communications has maintained a strong presence in the Miami-Dade County, Fla., city of Doral. Here, it has television studios and office space on NW 36th Street, a stone’s throw from Miami International Airport. There’s also a spacious rented facility that is home to Univision Radio/Miami, and had been used for the Fusion cable TV network operation.

However, Univision’s corporate headquarters happens to be on Third Avenue between East 39th and 40th Streets, just southeast of Grand Central Terminal and the Chrysler Building in Midtown Manhattan.

According to media reports in South Florida, that’s about to change, with Univision’s headquarters set to head out of New York.

Please Login to view this premium content. (Not a member? Join Today!)

The Big Bend region of Florida is still one of the more desolate, bucolic portions of the ever-growing Sunshine State, attracting more hurricanes than travelers or Snowbirds. It’s bigger communities include Apalachicola and Port St. Joe, due east of Panama City.

It is here that a 100kw FM is being spun, putting a “Cross Country” move in play.

Please Login to view this premium content. (Not a member? Join Today!)

He’s known across the U.S. for his longtime role as the host of the syndicated early-prime TV game show Wheel of Fortune. But, in broadcast circles, he’s also known as the licensee of an AM radio station that has served Maryland’s state capital since 1949.

Now, Pat Sajak is selling the station’s license, while listing the land where this property’s studios and towers lie for a bit more than he’s collecting for the 72-year-old broadcast facility.

Please Login to view this premium content. (Not a member? Join Today!)

Jon Tatooles, James Gordon, Matt Anderson

Field mixer, multitrack recorder and wireless equipment maker Sound Devices has been acquired by Audiotonix.

The England-based company has scooped up a number of well-known audio console manufacturing names over the last few years. That list would include Allen & Heath, Calrec, Solid State Logic, DiGiCo and audio equipment distributor Group One.

Founded in 1998 by Matt Anderson and Jon Tatooles, the company carved out a niche in the film and TV world with field mixers, wireless equipment and small, portable multitrack recorders. Both principals were still with the company at the acquisition. Tatooles will depart while Anderson will remain as CEO and chief engineer.

Audiotonix CEO James Gordon said, “The addition of Sound Devices and their fantastic team to our portfolio of premium audio brands is a proud moment for all involved. Their expertise and technical pedigree in film production, broadcasting and professional recording is a great fit.”

 

The post Sound Devices Acquired by Audiotonix appeared first on Radio World.

In 2019, leaders from major radio groups discussed the state of the industry at the Radio Show. From left: Moderator Stephanie Ruhle of NBC News. Mary Berner, president and CEO, Cumulus Media; David Field, president and CEO, Entercom; Bob Pittman, chairman and CEO, iHeartMedia. Photo: Paul McLane.

There will be no more fall Radio Show conventions.

The National Association of Broadcasters and the Radio Advertising Bureau have announced that beginning in April, the fall Radio Show, which has been a staple of the U.S. commercial radio industry for decades, will be integrated into the NAB Show.

“This change provides more opportunities in one location for radio professionals and elevates radio in the larger media ecosystem represented at NAB Show,” NAB stated.

“The integrated event in Las Vegas will feature signature awards, networking events and a comprehensive conference program, including popular sales and marketing sessions presented by the Radio Advertising Bureau.”

The organizations had already planned a temporary integration of sorts for this year’s show, when they planned to collocate the Radio Show with the rescheduled NAB Show. But both ultimately were canceled because of the ongoing health crisis.

It turns out that the final in-person fall Radio Show was in Dallas in 2019. A virtual version was held last year. The pre-pandemic schedule had called for the show to be in Nashville in 2020, New Orleans and 2021 and Nashville again in 2022. Cities that have hosted the event in the recent past also include Philadelphia, Orlando, Indianapolis, Chicago and Washington.

The Radio Show in recent years drew about 2,100 reported attendees. Its agenda traditionally emphasized radio management and sales content, though there was always a technical component and exhibit floor. In recent years the event has been held in hotel conference settings rather than larger convention venues.

Longtimers will also recall that in the 1990s the show was part of an umbrella event called the World Media Expo that also encompassed SBE and SMPTE conferences.

NAB also announced that the presentation of the 2021 NAB Marconi Radio Awards and the State of the Industry Address by NAB President and CEO Gordon Smith will take place virtually on Nov. 10.

This will be Smith’s final State of the Industry address; he steps down at the end of the year, to be succeeded by Curtis LeGeyt.

 

The post The Fall Radio Show Is No More appeared first on Radio World.

Nielsen Holdings plc will report its financial results for the third quarter 2021 two weeks for today.

What can investors expect to hear from CEO David Kenny on Thursday, October 28 at 8am Eastern when he and other company executives will host a call to discuss its Q3 results?

Numbers that reflect the full-year 2021 guidance offered with Nielsen’s Q2 results are expected.

Nielsen is updating full year 2021 guidance as follows:

• Total revenue growth on a constant currency basis: 2.5% to 3.0% (previously 2.0% to 3.0%)
• Organic revenue growth on a constant currency basis: 4.0% to 4.5% (previously 3.5% to 4.5%)
• Adjusted EBITDA margin: 42.3% to 42.6% (previously 42.25% to 42.5%)
• Adjusted EBITDA: $1,475 – $1,490 million (previously $1,470 – $1,490 million)
• Adjusted earnings per share: $1.54 – $1.61 (previously $1.47 – $1.58)
• Free cash flow: $620 – $650 million (previously $595 – $645 million)

These estimates reflect Nielsen as if the sale of Global Connect occurred on January 1, 2020. The estimates exclude $200 – $220 million (previously $220 – 240 million) of separation-related costs related to the sale.

 

The Society of Broadcast Engineers will hold its annual membership meeting and awards program online on Monday (Oct. 18).

The meeting was to have been held at this month’s NAB Show, which ended up being cancelled. So the society will use its monthly SBE WEBxtra presentation for the purpose.

“The SBE Membership Meeting portion provides an update on SBE activities and programs from the past year with reports from the secretary, treasurer and several committee chairs,” SBE stated. “It also includes some final thoughts from SBE President Wayne Pecena, who is completing his second term in that role.”

Newly elected SBE officers and board members will be sworn in to begin their terms, including incoming President Andrea Cummis.

[Read Radio World’s interview with Andrea Cummis]

“Following the swearing in, Andrea will lead the awards presentation portion of the program, which will recognize the efforts of SBE chapters, members and sustaining member companies for their accomplishments and honors from the SBE Awards Program. Presentations include the Robert W. Flanders SBE Engineer of the Year award to Chris Tobin and the Technology Award to Telos Alliance.”

SBE Certification Director Megan Clappe, who was recently named an SBE Fellow, will also be recognized.

The event takes place on the SBE YouTube channel on Monday at 3 p.m. Eastern/Noon Pacific.

 

The post SBE Holds Online Membership Meeting Monday appeared first on Radio World.

TORONTO — The digital audio advertising exchange “connecting brands with audiences at scale” across music, radio and podcasts has selected its new Chief Growth Officer for North America.

It’s a move that follows Les Hollander’s promotion to CEO of DAX North America earlier this year.

Jon Hales is taking the role. He joins Global-owned digital advertising platform DAX from Spotify, where his seven-year tenure saw him launch the Spotify Canada Team, Spotify’s Global Sales Operations Group and, most recently, lead a re-boot of Spotify’s LATAM advertising business.

Hales previously headed up Video Sales for AOL Canada and was Director of Sales for Discovery Channel Canada, under Bell Media.

Hollander calls Hales “a growth-oriented leader and brings a wealth of expertise in the areas of sales and operations, with an eye for innovation and keen ability to scale the business.”

Hales will split his time between the U.S. and Canadian groups, focusing on tactical revenue growth, team performance, strategy, and alignment across the North America operation, DAX says.

— Carina Newton